Contact details can be found in the item description. And the best of all, your goods will be delivered directly to your home. All products in almost unbeatable price-performance.Workshop and Spare parts service. Connection Diagram: Water Flow Controller FLUOMAC with Borehole Pump. Connection Diagram: TEEPRES® Flow Monitor and Borehole Pump. Connection Diagram: PRESFLO Flow Monitor and Borehole Pump.
ENERGY SAVING DEEP WELL PUMP "BOREHOLE-STAR" and PUMP CONTROL - free selection. Great quality - low prices!
Please note that if the permissible length or weight is exceeded, pump motor and pump will be delivered separately. These must be expertly installed on site according to instructions. The pump is especially recommended for narrow wells or boreholes.
Domestic water supply, irrigation or sprinkling. Inexpensive, powerful, solid quality deep well pump. Pump diameter: 76mm - 97mm. Robust stainless steel housing with brass parts.
No sucction of bottom sediment by lateral suction. High quality encapsulated electric motor. Includes connection box with capacitor easily accessible easily accessible in the juncton box (as always this is an advantage because components are subject to wear and tear).Robust, stable high quality deep well pump made from stainless steel for extremely deep boreholes from ca. Due to its special construction, this pump significantly delivers more water than similar pumps with the same consumption of electrical energy. We therefore genuinely refer to this pump as ENERGY SAVING PUMP!
Despite low electric power consumption of only 250/550/750W/1100W/1500W, a high hydraulic output is provided. 3 BOREHOLE-STAR 250-7 Pump with 15m Cable Output: 250 Watt; max. Pressure: 3.2bar; diameter: 76mm; cable length ca. 3 BOREHOLE-STAR 550-7 Pump with 15m Cable Output: 550 Watt; max. : 3300l/h; diameter: 76mm; cable length ca.
3 BOREHOLE-STAR 750-7 Pump with 15m Cable Output: 750 Watt; max. Pressure: 8.7bar; diameter: 76mm; cable length ca.
3 BOREHOLE-STAR 1100-7 Pump with 15m Cable Output: 1100 Watt, max. Pressure: 11.4bar; diameter: 76mm; cable length ca. 4 BOREHOLE-STAR 370-7 Pump with 15m Cable (flat cable) Output: 750 Watt; max. 4 BOREHOLE-STAR 550-7 Pump with 15m Cable (flat cable) Output: 550 Watt; max.
4 BOREHOLE-STAR 750-7 Pump with 15m Cable (flat cable) Output: 750 Watt; max. Pressure: 5.9bar; diameter: 96mm. 4 BOREHOLE-STAR 1500-7 Pump with 15m Cable (flat cable) Output: 1500 Watt; max.4 BOREHOLE-STAR 1500-4 Pump with 15m Cable (flat cable) Output: 1500 Watt; max. 5 BOREHOLE-STAR 1500-4 Pump with 15m Cable Output: 1500 Watt; max. 6 BOREHOLE-STAR 3000-4 Pump with 15m Cable Output: 3000 Watt; max. FLOW CONTROLLER with integrated dry run protection.
The flow controller switches the connected pump on and off when needed. This provides the consumer with water. If the consumer is closed, the flow is reduced and the pump is then switched off.The inbuilt dry run protection makes this flow monitor special. If there is no water available after switching on the pump, (cistern empty) the flow switch automatically switches off the pump (dry run protection). Selecting the right switching device for the pump depends on the intended use of the pump. Each flow monitor is provided with a cartridge filter! As a result, problems which are due to water pollution can be significantly reduced. Italian made FLUOMAC Automatic Controller (wired) with cartridge filter. We absolutely recommend the FLUOMAC. Flow controller FLUOMAC has a built-in dry running protection. If there is no water available after switching on the pump (empty cistern), the flow controller will automatically switch off the pump (dry run protection). A check valve is also integrated into the flow controller. This prevents the emptying of pipe systems on the consumer side. The pressure gauge monitors the switch on pressure and the pressure in the system. The switching device is not suitable for pumps having a pressure significantly below 1.5bar. TEEPRES® Automatic Controller (wired), with cartridge filter. Intelligent PUMP CONTROL TEEPRES® - with LEAK MONITORING and EMERGENCY SHUTDOWN.
Ideal for centrifugal pumps, well pumps, submersible pumps, borehole pumps and jet pumps! Wired and ready to plug in booster pumps with check valve and gauge display.
It has a connection for 2 pressure lines! PRESFLO® Flow Monitor Automatic Controller(wired), with cartridge filter. Intelligent PUMP CONTROL PRESFLO® - for automatic switching on of the pump (if necessary), integrated mini-pressure tank, dry run protection and leak monitoring, with inbuilt check valve and manometer (not pressure regulator).
Through special protective coating of electronics the flow monitor PRESFLO® can be used in manholes of the tank or pump shafts. Installation instructions should be observed. STEADYPRES® 8.5Amp M/M - Automatic Pump Controller Inverter (unwired), with cartridge filters.
To reduce energy consumption when changing pump performance (supplying of toilets, wash machines, lawn sprinkler system) up to 85%, we recommend the use of STEADYPRES® 8.5Amp M/M - Automatic Pump Controller Inverter with intelligent self monitoring functions. STEADYPRES® with integrated dry run protection and an adjustable Auto-Start ensures constant pressure in the water cycle, avoids dangerous pressure surges, overclocking and overheating of the pump. In addition, pump life is significantly increased while the noise is distinctly reduced.PUMP SELECTION: What is the right deep well pump for you? You should consider the following. 1How deep is my well/borehole? If the well is 20m deep and the max.
Pump pressure is 5bar, the water comes with a pressure of 3bar directly from the well. 2 How far away from the well can water be delivered?
Depending on the wire cross-section, considerable pressure losses in some cases are taken into account. Basically, the water line should not be substantially less than the connecting pieces of the pump. In a conventional hose with 25mm inner diameter and smooth inside wall approximately 0.2-0.5bar pressure loss per 25-30m hose length should be considered. 3 Which output is available to me at the highest water discharge point above ground level?
The right pump should deliver water at the desired flow rate with a pressure of about 2.5 - 3.5bar (conventional water pressure in the mains water pipe) from the tap. Calculate the installation depth of the pump plus the level of the deepest point of withdrawal and divide the value by 10 (precisely 9.81). Deduct this number from the maximum pressure of the pump. Water will be delivered at the highest point with this pressure. The maximum output results from the characteristic curve of the respective pump at the calculated pressure.4 What is the diameter of my well? The maximum pump diameter should be minimum 3 - 4mm smaller than the well/borehole diameter. 5 How much sand can my well manage? Well pumps may not operate with sandy water. When drifting sand is present, by means of a screw pump such as SCREW-STAR all the sand is pumped out until only clear water comes out. Which output do I need at the highest extraction point? The output of well pumps decreases with increasing discharge height due to design.
This is reflected in the pump curve. A rule of thumb: the optimum performance for pump operation is located approximately in the middle of the pump curve. At this point, the pump motor operates most effectively and consumes the least energy based on the flow rate of water.You now have an idea as a rule which output your pump must produce. Therefore, select a pump which has an output at its maximum performance. The pressure must of course be sufficient for the desired application. Thus the right pump selection can enormously influence your electricity bill! BOREHOLE STAR Deep Well Pump (your selection).
Flow monitor Fluomac/TEEPRES®/PRESFLO® (wired) or STEADYPRES® (unwired). 3-Deep Well BOREHOLE STAR 250-7 Pump. Flow rate (Qmax): 2800 l/h. Number of wheels: 10 (technopolymer).Connection pressure side: 2,54 cm (1 inch) IG. 3-Deep Well BOREHOLE STAR 550-7 Pump. Flow rate (Qmax): 3300 l/h. Cable length 15m (flat cable). Content of solid substance: 0,10%.
Connection pressure side: 1,2 inch IG. 3-Deep Well BOREHOLE STAR 750-7 Pump. Flow rate (Qmax): 3.700L/h.Cable length 15m: (flat cable). Content of solid substance: 0,20%. 3-Deep Well BOREHOLE STAR 1100-7 Pump. Flow rate (Qmax): 4.500L/h. Cable length: 15m (flat cable). 4-Deep Well BOREHOLE STAR 370-7 Pump. Cable length: 1,5m (flat cable). Connection pressure side: 1 IG. 4-Deep Well BOREHOLE STAR 550-7 Pump. Connection pressure side: 1 1/4 IG.
4-Deep Well BOREHOLE STAR 750-7 Pump. Connection pressure side IG 1 1/2 inch. 4-Deep Well BOREHOLE STAR 1500-7 Pump. Diameter with cable protection: 96mm. 4-Deep Well BOREHOLE STAR 1500-4 Pump.
Cast iron oil chamber with stainless steel cover. Oil-bearing shaft with permanent lubrication. Used material: stainless steel, brass, cast iron, glass fibre reinforced polymer. 5-Deep Well BOREHOLE STAR 1500-4 Pump. 6-Deep Well BOREHOLE STAR 3000-4 Pump.Connection to 2.54cm (1 inch) external thread. Voltage: 110 - 230V at 50/60Hz. Switch on pressure: 1 - 3.5bar (adjustable). Preset cut-in pressure: 1.5bar (optimum for most applications). High quality rubber cable H07RN-F.
Voltage: 230V AC at 50Hz. Cable length: ca 0.5m mit Schuko-Dose, ca 1.5m mit Schuko-Stecker. Suction pipe connection: 1 external thread (BSP). Working pressure: 10bar (150 PSI).Bursting pressure: 40 bar (580 PSI). Voltage: 230V AC/110V at 50-60Hz.
Shutdown flow (Qa): 1 - 2l/min. Connections: 1" M BSP / 1" M NPT. Protection against: dry running (automatic reset) due to frequent starting. Power supply: Einphasen-230V (AC ± 10%) -50/60HZ.
Input voltage: 230V AC at 50Hz. Output voltage for pump: 230V at 25-50Hz. Adjustable pressure: 1 - 9bar. Operating pressure: 10bar (150 PSI).
Dry running protection function with automatic reser. Bursting pressure: 40bar (580 PSI). We regularly check the product quality of our suppliers and guarantee the best quality and durability for long enjoyment of our products. For used goods, this is reduced to 12 months.If we provide a further guarantee, this is listed in the item description. For used goods this can be ruled out.
Write to us and we will solve the problem together! So you is more helpful and us too! We strive constantly to improve the quality and service. Let us deal fairly with each other!
If in doubt, unpack the goods immediately and check this. You will receive an invoice with VAT. Our Conditions, Cancellation and return rights, can be found on our -site. Or below on the supply side. E-WASTE, BATTERY LEGISLATION, PACKAGING DISPOSAL.
The instructions can be found in our Shop. The item "DEEP WELL PUMP BOREHOLE WATER FLOW CONTROL AUTOMATIC SWITCH SUBMERSIBLE GARDEN" is in sale since Tuesday, August 16, 2016. This item is in the category "Garden & Patio\Ponds & Water Features\Pond & Fountain Pumps". The seller is "amur_shop" and is located in Schwallungen. This item can be shipped to European Union member countries.