And the best of all, your goods will be delivered directly to your home. All products in almost unbeatable price-performance. Workshop and Spare parts service.
SELECTION I, II, III: 3 Pump ECO-SCREW-GARTEN 370-7 / 550-7 / 750-7. Performance diagram for 3 Eco-Screw-Garden 370-7 / 550-7 /750-7. SELECTION 1: Flow Monitor FLUOMAC original EU produced quality from Italy, automatic controller (wired). SELECTION 2: Flow Monitor BRIO origial EU produced quality from Italy, automatic controller (wired). DEEP WELL PUMPS-SET: Sand compatible borehole pumps with oil-bearing motor and high quality flow monitor from EU-PRODUCTION.ECO-SCREW-GARDEN Borehole Pumps & Flow Controllers. For a light to medium sand presence. For garden irrigation or sprinkling. Affordable, high quality, solid deep well pumps. For extremely deep boreholes (upto 103m).
Stainless steel casing with brass and cast iron parts. Solid deep well pumps made of stainless steel at bargain prices - ideal for garden watering and sprinkling. With these cost-effective borehole pumps, pumping of water is not a problem. High components of sand, iron, manganese and other minerals have an influence on the long-term functioning of borehole pumps. We recommend that well water be analysed before using a borehole pump.If necessary, take measures to improve water quality. These are some of the few genuine deep well pumps which can easily cope with sand quantity where the usual impeller pumps break down after a short time. They are suitable for light to medium sand volumes.
However, the higher the sand proportion, the higher the wear and tear of the screw conveyor. For this reason, we recommend that if there is a presence of sand, always order spare part sets with wear parts. How do you determine sand proportion in water? Simply run 500 - 1000L of water into a tall container so that water runs over the edge and sand settles at the bottom.Measure the amount of water as well as the weight of the deposited sand. Afterwards, you can calculate the proportion. SELECTION I: 3 ECO-SCREW-GARDEN 370-7 Borehole Pump.
SELECTION II: 3 ECO-SCREW-GARDEN 550-7 Borehole Pump. SELECTION III: 3 ECO-SCREW-GARDEN 750-7 Borehole Pump. Pressure, flow controlling, automatic switching on of centrifuhal and borehole pumps. Automation of the pump control is regulated through pressure and flow rate.
The flow monitor automates and controls the switching on of the centrifugal or borehole pump. It monitors the pressure in the pipe system, from the pump to the consumer. When water is extracted from the pipe system, pressure decreases. If the pressure falls below 1.5 bar (adjustable) , the flow monitor switches on the connected device (for instance, a borehole pump).Diese versorgt die Verbraucher wieder mit Wasser. Wird der Verbraucher geschlossen, verringert sich der Durchfluss und die Pumpe wird abgeschaltet.
The special feature of this flow monitor is the built-in dry-run protection. If there is no water (cistern empty) after switching on the pump, the flow monitor automatically switches off the pump (dry run protection). A check valve is also integrated in the flow monitor. This prevents the pipe system from running dry on the side of the consumer.
The manometer monitors the switch-on pressure and the pressure in the system. The switching device is not suitable for pumps with a pressure build-up well below 1.5 bar.
SELECTION 1: Flow Monitor FLUOMAC ORIGINAL EU Produced QUALITY from ITALY, Automatic Controller (wired). FLUOMAC Automatic Controller, wired Max. Operating pressure: 10 bar; Max. Volumetric flow rate: 80l/min; Nominal current: 10A. SELECTION 2: Flow Monitor BRIO ORIGINAL EU Produced QUALITY from ITALY, Automatic Controller (wired).
BRIO Automatic Controller, wired Max. Operating pressure: 7 bar; Max. Volumetric flow rate: 80l/min; Nominal current: 12A. Borehole Pump ECO-SCREW-GARDEN 370-7 / 550-7 / 750-7. FLUOMAC / BRIO® Flow Controller (wired).
Pressure side connection (internal thread). Connection via 2.54cm (1 inch) external thread. Operating voltage: 110 - 230V at 50 / 60Hz. Switch-on pressure: 1 - 3.5 bar (adjustable). Preset switch-on pressure: 1.5 bar (optimal for most applications).
High quality rubber cable H07RN-F. Operating voltage: 220/240V at 50/60Hz. Inlet connection via 2.54cm (1 inch) external thread. Outlet connection via 2.54cm (1 inch) internal thread.
We regularly check the product quality of our suppliers and guarantee the best quality and durability for long enjoyment of our products. For used goods, this is reduced to 12 months. If we provide a further guarantee, this is listed in the item description. For used goods this can be ruled out.
Write to us and we will solve the problem together! So you is more helpful and us too! We strive constantly to improve the quality and service. Let us deal fairly with each other! If in doubt, unpack the goods immediately and check this.You will receive an invoice with VAT. Our Conditions, Cancellation and return rights, can be found on our -site. Or below on the supply side. E-WASTE, BATTERY LEGISLATION, PACKAGING DISPOSAL. The instructions can be found in our Shop.
The item "BOREHOLE PUMP DEEP WELL WATER FLOW MONITOR CONTROL ELECTRIC SUBMERSIBLE GARDEN" is in sale since Tuesday, June 6, 2017. This item is in the category "Garden & Patio\Ponds & Water Features\Pond & Fountain Pumps". The seller is "profitech-shop5" and is located in Schwallungen. This item can be shipped to European Union member countries.de